人気ブログランキング | 話題のタグを見る

connection failed but the wireless is in good conection

Why theres are connection failed  even though the wireless connection is in good connection?

Keys to the Problem connection failed but the wireless is in good conection

Download Error Fixer (Free)

Hi,
 
·         Which operating system are you using?
·         What antivirus program is installed on the computer?
·         Did you try updating the latest Wireless network adapter drivers for Windows 7 and check if it helps?
 
Follow these steps if you are using Windows 7 or Windows Vista
Method 1: Temporarily disable the computer`s anti-virus program and check if it helps.
If it finds it, then you may have to check for the settings within the program.
 http://windows.microsoft.com/en-us/windows7/Disable-antivirus-software
 
Note:  Ensure to enable your anti-virus back on the computer after you finish these steps.
It is not recommended to disable these settings on the computer.
This is just to troubleshoot the issue.
 
 
 Method 2:
Step 1: Check if any updated drivers are available for your wireless network adapter from the manufacturer’s website, if yes, go ahead to install them.
 
Step 2: You may follow the steps mentioned in the link to improve your wireless network
 
10 tips for improving your wireless network
http://www.microsoft.com/athome/setup/wirelesstips.aspx
 
 
For more information, check this link:
 
Troubleshoot low wireless signal quality problems (Also applicable for Windows 7)
http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-low-wireless-signal-quality-problems
 
Also see:
Network connection problems in Windows

Running System Update Readiness Command

On running the System Update readiness Command, it will Detect & Replace Incorrect Registry data with the Correct one. Which may ultimately Solve connection failed but the wireless is in good conection in Windows.

  1. Open CMD as Administrator by Simply Right Clicking on Start button > Command Prompt (Admin).
  2. Now Type or Copy paste "DISM.exe /Online /Cleanup-image /Scanhealth" and hit Enter,
  3. Now again Type or Copy paste this "DISM.exe /Online /Cleanup-image /Restorehealth" and hit Enter.
  4. Close the Command Prompt Window because we are done.

Try and see if you still get the same error connection failed but the wireless is in good conection in your Windows.

Note: You may be prompted to enter your administrator's password when you try to execute certain system tasks!

Another Safe way to Fix the Problem: connection failed but the wireless is in good conection:

How to Fix connection failed but the wireless is in good conection with SmartPCFixer?

1. Click the button to download SmartPCFixer . Install it on your computer.  Run it, and it will scan your system. The errors will be shown in the scan result.

2. After the scan is done, you can see the errors and problems which need to be fixed.

3. The Repair part is done, the speed of your computer will be much higher than before and the errors have been fixed. You can also use other functions in SmartPCFixer. Like dll downloading, junk file cleaning and print spooler error repair.


Related: Can't Find Windows Media Center Or Media Player On Win 7 Pro N (x64),Can't Add New Favorites To Existing Folders - "unable To Create . . .[name Of Webpage]. . . Unspecified Error".,Can't Access Internet Search Engines,Can You Connect The LAN Adapter For Wii On Your Windows 7 Laptop?,Can't Do A First-ever Backup Onto A Thumb Drive; Can't Get Past First DVD Either,Captions In Text Boxes Won't Update,Cant Send Emails Or Receive Them I Get Failure Notice From Mailer Daemon,Card Reader Not Recognized Since Upgrading To Windows 8.1 Pro.,Chckdisc Stops At 51% In Step 5,Charts And Combo Box In Excel 2007,Computer Freezes Randomly, Light On Mouse And Keyboard Goes Off,Connecting To WI FI Internationally.,Computer Crashes During Windows Experience Index And Gaming (BSOD),Computer Locks Up Sometimes When It Goes To Sleep,Computer Will Not Boot Into Windows.
Read More: Troubleshoot:Convert a cell formated as % to a text string? Error,Solution to Error: Constant Interrupt_Exception_Not_Handled blue screen restart,Troubleshoot:connection status is unknown,the service to detect this status is turned off. how can i fix this problem?,Troubleshooting:converting a number from millions to thousands Error,Troubleshooting:Constant \"This page can't be displayed\" message after IE10 was updated to IE11,cant send or forward any mails am told to enter characters but dont see them,casino player is unable to use,Changing Sheet names in Multiple graphs using VBA,Changing Selection in Combo Box (Form Control),Conditionally add text fields to Word 2010 form based on user selection from drop down control box
# by ExternalCdDrive8 | 2016-09-23 17:30

combination of Vlookup, If and color coding functions possible?

Any help on the following issue will be appreciated.
As shown below in the tables, I want to compare Result col in Table 1 against L1 to L5 col in Table 2.
I already have a pre specified color if result is equal to or exceedes any of the Limit values in
Table 2.
Let's say for example B2 of Table 1 exceedes L1,L4 and L5.
Can the cell B2 be displayed in three colors using a combination of vlookup, if and color coding.
Following are the tables, these are for example purpose only.
       Table 1                                                                                                   Table 2


Parameter
Result
Parameter
L1
L2
L3
L4
L5

A
613.74
A
550.0000
1400000.0000
5400000.0000
75.7000
41.8000

B
4.69
C
10.0000
42000.0000
180000.0000
2.1200
1.1700

C
1893.00
B
0.0042
10.0000
34.0000
0.0010
0.0006

D
62000.00
G
0.0390
210.0000
490.0000
0.0054
0.0030

E
112.87
W
0.0040
29.0000
100.0000
47.4000
26.2000

F
987.50
K
1.0000
1700.0000
18000.0000
0.4790
0.2640

G
512.23
F
5.0000
640.0000
1400.0000
2.4100
1.3300

H
7.89
I
80.0000
820.0000
1800.0000
33.5000
18.5000

I
1200.49
D
80.0000
62000.0000
220000.0000
44.1000
24.3000

OL
945.57
OL
0.8700
390.0000
1300.0000
0.2160
0.1190

E
700.0000
2200000.0000
11000000.0000
110.0000
60.4000

MK
24.0000
220000.0000
220000.0000
264.0000
145.0000

H
24.0000
390000.0000
390000.0000
262.0000
145.0000

Color
 
 
 
 
 


thanks,
SJ

Keys to the Problem combination of Vlookup, If and color coding functions possible?

Download SmartPCFixer for Free Now

The short answer is: no (probably)
• Conditional formatting won't work.

• You would be able to color 5 contiguous cells to the right of your Table_1 values, if that's acceptable

OR...If there aren't many cells to show color banding,
• I know of a way to do that...but, not without creating a somewhat fragile structure that you may not want to maintain.

Can you tell us how the results would be used?

Ron Coderre
Microsoft MVP - Excel (2006 - 2010)

P.S.
If any post answers your question, please mark it as the Answer
(That way it won't keep showing as an open item.)

Run CHKDSK
  • Go to the Start button.
  • In the Search box, type "cmd" (without quotes) and press Enter.
  • At the command prompt, type "chkdsk /r /f" (without quotes) and press Enter.
  • Reboot your computer.

Another Safe way to Fix the Problem: combination of Vlookup, If and color coding functions possible?:

How to Fix combination of Vlookup, If and color coding functions possible? with SmartPCFixer?

1. Click the button to download Error Fixer . Install it on your computer.  Open it, and it will perform a scan for your system. The junk files will be shown in the scan result.

2. After the scan is finished, you can see the errors and problems need to be fixed. Click Fix All.

3. The Repair part is finished, the speed of your computer will be much higher than before and the errors have been removed. You can also use other functions in this software. Like dll downloading, junk file cleaning and print spooler error repair.


Related: Cannot Connect To Sites Powered By One Server,Can't Suceed At Installing Update For Microsoft Office 32 Bit,Cannot Access Another Windows 7 Computer Over A HomeGroup Network.,Cannot Open E-mail Or Access Certain Site, Please Please Help!,Can't Use Adobe Reader 9.3 And Flash Player With Windows 7,Cannot Type Text In Msn E-mails,Cannot Roll Back To IE8 - Not There When IE9 Is Uninstalled,Cannot Print Some Sheets In Excel 2007,Canon Ip4500 Printer Win 8,Cannot Print On New Windows 7 With Old Quickbooks 7.4 Program.,Change Default Save As Location In Internet Explorer To Desired Drive/folder,Cant Click On URL Within Outlook Express To Open The Page In IE.,Checking File System C At Startup AND Black Screen With White Blinking Underscore In Top Left Corner. PLEASE HELP!!!!!!!!!!!!!!!,Cascading Styles Question,Catalyst Control Center Has Stopped Working: Host Application"
Read More: Cant open a Microsoft Excel file directly from my desktop,Troubleshooter of Error: circle with red X,Troubleshooting:Changing search engines,Certain images don't load in browsers [Solved],Change a cell colour when formula is overwritten in a specified range Tech Support,can't disply two pdfs at the same time,Cannot connect with RDP after configuring port forward,Cannot "Add" anything to my favorites must "Reset" IE to add anything,Cannot open crestedg.century21.com in Internet Explorer 11 on Windows 8.1,Cant get online..0x7c3efb61/0xfa8b6373
# by ExternalCdDrive8 | 2016-09-19 17:26

Cannot set Outlook 2010 as 'default' for email

Office 2010 Home and Business - downloaded from Amazon late this past year....
I installed the program before, on the old PC and it seemed to work fine, but on this new Windows 7 Pro PC (64-bit) I cannot set Outlook as 'default' for anything related to email.
 Researching this, I find that this is not possible if this is only the
trial version'( and I see a 'click to run' in the installed programs, even though we installed the full version and activated the software).   So..
how to fix this?  I've un-installed and re-installed more than once, always with the same problem.
 Largest
of all is that when I create a document in, say, something like a 'pdf' in Adobe Acrobat Pro X, I have no way to select 'send to email' as I did previously when they had Office 2003 pro installed...  And I know that others who are running Home and Business
have this functionality in THEIR Outlook 2010 - but I cannot find ANYWHERE (either in Windows or Outlook) that I am able to set this as the 'default email client'..
and I have to presume that this MUST be the case to get this old functionality restored.  It's
as if the installation was somehow 'stopped' prior to this association being made, and even more interesting... when I try to look at 'default programs' absolutely NOTHING related to Office 2010 is shown.  
NADA....
which makes it exceedingly difficult to 'set' anything in Office as the 'default client software' ...
A little help please?...   
I'm beginning to feel that we should have NEVER 'wasted' the money on Office 2010 H&B ...
but was looking for an 'upgrade' to the old Office 2003 version she had installed on the old PC ...
OR - I should have coerced her to ante up the extra $200 for the full version of Office 2010 Pro... (a cautionary tale about a lead brick comes to mind...)
Wasting a lot of time on this...
and this PC operator is getting more than a bit P.O.'d because she cannot use the 'old tricks' she used to use......

Solutions to the Problem Cannot set Outlook 2010 as 'default' for email

Download SmartPCFixer for Free Now

There would be no reason to have a "Click-to-Run" version of O'2010 installed if you are using the full version so first step would be to uninstall the C2R version and then repair/re-install your full version.
In short, if you are not sure of how many different
versions may have been previously installed on this system, would uninstall all things related to Office and start fresh rather then go through a trial and error approach trying to figure out what the actual state of the union is on this system.
 
(Note: Office 2013 would be a click2run version but can co-exist with any other version of office).
 
That said, would also suggest that you ensure that the 32bit version of O'2010 H&B is installed to mitigate any possible problems with other programs.

Make Sure that your System Meets the System Requirements

Microsoft Windows Requirements :

  • 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
  • 1 gigabyte (GB) RAM (32-bit) or 2 GB RAM (64-bit)
  • 16 GB available hard disk space (32-bit) or 20 GB (64-bit)

You need to double-check your computer's hardware configuration against the following Microsoft requirements. If your PC hardware is not up to par, then make sure you update where necessary before continuing.

Another Safe way to Repair the Problem: Cannot set Outlook 2010 as 'default' for email:

How to Fix Cannot set Outlook 2010 as 'default' for email with SmartPCFixer?

1. Click the button to download Error Fixer . Install it on your system.  Run it, and it will scan your system. The junk files will be shown in the scan result.

2. After the scan is finished, you can see the errors and problems which need to be fixed.

3. The Fixing part is finished, the speed of your computer will be much higher than before and the errors have been fixed.


Related: Base Filtering Engine Service Is Not Running On The Computer​.,Battery Notification Not Showing,Bex Error- How Can I Fix This,Black Screen On Startup And When Trying To Switch Users?,BCCode:9f Every Time When Windows 7 Comes Back From Suspend Mode,BSOD Windows 7 Profesional 64bit (Wdf01000.sys),Bug In MS Word 2010 Regarding Folder Naming And "Save As" Command,Break A Table Into Two Tables In Excel 2007,Calculating Min, Max And Average Over Multiple Columns Within A Pivot Table.,Calculating A Start Date In Excel.,Can You Insert Image Into A Comment In Excel,Can't Access Windows Live Family Safety From IE8 Or IE9 - Continuous Loading,Can't Drag & Drop On Programs Win7 X64,Can't Connect To Internet Keeps Telling Me To Check Internet Connection Then Starts To Run A Diagnostic,Can I Use My Acer Laptop To Extract Wireless Modem Information Via U.S.B. To Connect A Desk Top,Can't Install ITunes On 64-bit Computer,Can't Open Yahoo Mail In Windows 7,Can't Install Windows Update Error Code 0xc8000247,Can't Install Net Framework 4 Client,Can't Open Downloaded Documents In Word And Excel
Read More: Tech Support: Cannot surf the web without continually disconnecting and reconnecting,How to Fix Cannot open PDF file,How to Fix - Canon S300 printer drivers for Windows 7?,How Can You Fix - Cannot Use view web cam just video call option in WLM?,How to Fix - Cannot open up any .pdf file through email or the Internet??,Can't connect to a Home network on homegroup,Can IE's orange RSS link be changed to open the Google Reader?,Can I send a JPEG file in a PDF form ?,cannot delete older version of quicktime,CANNOT connect Windows Mobile device to Windows Mobile Device center in Win 7
# by ExternalCdDrive8 | 2016-09-14 11:42

Can't install newest Vista update

After my computer installs the lastest Vista update and it shuts down ny computer.  Upon restarting my computer it won't load windows.  I have to use windows fix to resolve the problem (it uses the systems goback to a old restart boot)  After it repairs
the problem it tells me that the reason my computer would not load windows is because of a patch.  My computer works fine after the repair however the lastest vista update still has not been installed.  I tried twice and got the same results.  Any help will
be appreciated.

Anwsers to the Problem Can't install newest Vista update

Download SmartPCFixer for Free Now

Hello David the Giant Slayer,

Thank you for using Microsoft Answers Forums.
Solution:
Follow the steps from the below web link.
You cannot install some updates or programs.
http://support.microsoft.com/kb/822798
Reset the Windows Update components.
http://support.microsoft.com/kb/971058

That should fix the issue for you.

Thank you.

UDAY$012 Please let me know whether the solution worked or not, I appreciate and value your feedback.

Don't Download Malware

Where are you getting the download?

There are malicious people who download valid copies of a popular download, modify the file with malicious software, and then upload the file with the same name. Make sure you are downloading from the developer's web page or a reputable company.


Cancel or deny any automatic download

Some sites may automatically try start a download or give the appearance that something needs to be installed or updated before the site or video can be seen. Never accept or install anything from any site unless you know what is downloading.

Avoid advertisements on download pages

To help make money and pay for the bandwidth costs of supplying free the software, the final download page may have ads. Watch out for anything that looks like advertisements on the download page. Many advertisers try to trick viewers into clicking an ad with phrases like "Download Now", "Start Download", or "Continue" and that ad may open a separate download.

Another Safe way to Repair the Problem: Can't install newest Vista update:

How to Fix Can't install newest Vista update with SmartPCFixer?

1. Click the button to download SmartPCFixer . Install it on your system.  Open it, and it will scan your computer. The junk files will be shown in the scan result.

2. After the scan is finished, you can see the errors and problems need to be repaired. Click Fix All.

3. When the Fixing part is finished, your computer has been speeded up and the errors have been removed


Related: Bearshare Has Problems Opening And Connecting To Windows 7,Black Screen During Startup And When Opening Programs,Base Filtering Engine Is Not Running Afer Installingg Norton Security Suite,Before Installing Windows 7 I Backed Up All My Files. I Was Running Vista. My Problem Is How Do I Restore My Files From Backup?,Bitcomet Having Frequently Not Responding..,Can Not Add (pin) Some Program Icons To Start In Win 8,Can't Expand Dual Boot Win 7 Partition,Can Not See Sata Hard Drive In Windows 7 Explorer,Can't Change Language On Windows 8.1,Can't Download QIF Or OFX Files From My Bank.
Read More: Troubleshoot:Can't change date/time on Windows 8.1 Error,How to Fix - Can Windows 7 and XP coexist in the same partition??,How to Fix - Can't get an e-mail to "Just ASK"(www.Just Ask failed)?,Troubleshooting:Can it be possible to split the excell sheet both horizontally and vertically?,Troubleshoot:can i use visual studio on iPad?,Can I add Access to my Office Small Business 2007,Can't get correct ip address,can not open facebook online,Can't access anything in control panel, limited access to internet,Can not download anything (Microsoft products included). Win 7, IE9. Everything is reported as virus (install_flashplayer11x64ax_gtbp_chrd_aih.exe contained a virus and was deleted)
# by ExternalCdDrive8 | 2016-09-08 12:50

Can I program my function keys?

I'd like to program my function keys to hold things such as my e-mail address so I don't have to CONSTANTLY keep typing it.
 Does anyone have any ideas of how to program function keys?

Solutions to the Problem Can I program my function keys?

Download Error Fixer (Free)

Hi,
Two options:
1.- Keytweak freeware:
http://webpages.charter.net/krumsick/
or
2.- Microsoft Keyboard layout creator:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=8be579aa-780d-4253-9e0a-e17e51db2223&DisplayLang=en
Carlos

Don't Download Malware

Where are you getting the download?

There are malicious people who download valid copies of a popular download, modify the file with malicious software, and then upload the file with the same name. Make sure you are downloading from the developer's web page or a reputable company.


Cancel or deny any automatic download

Some sites may automatically try start a download or give the appearance that something needs to be installed or updated before the site or video can be seen. Never accept or install anything from any site unless you know what is downloading.

Avoid advertisements on download pages

To help make money and pay for the bandwidth costs of supplying free the software, the final download page may have ads. Watch out for anything that looks like advertisements on the download page. Many advertisers try to trick viewers into clicking an ad with phrases like "Download Now", "Start Download", or "Continue" and that ad may open a separate download.

Another Safe way to Fix the Problem: Can I program my function keys?:

How to Fix Can I program my function keys? with SmartPCFixer?

1. Download SmartPCFixer. Install it on your system.

2. After the scan is done, you can see the errors and problems which need to be fixed.

3. The Repair part is finished, the speed of your computer will be much higher than before and the errors have been fixed. You can also use other functions in this software. Like dll downloading, windows updating and print spooler error repair.


Related: How to Update ASUS Xonar D2X driver for Windows XP 32/64-bit,Update ATI VGA Driver version 6.13.10.5779,How to Download Chicony Camera Driver version 61.005.029.1900,Download OKI C9800(PCL),How to Update TI Card Reader Driver version 2.0.0.10,Method to Download Toshiba Portege R835-P83 eco Utility v.1.3.21.0 driver,Method to Download Toshiba Satellite A660-BT2N23 Face Recognition v.3.1.3 driver,Download Toshiba Satellite L355-S7907 Face Recognition v.2.0.17.32 driver,[Solved] Download Toshiba Satellite L740-BT4N11 PC Health Monitor Utility v.1.7.9.64 driver,How to Download Toshiba Satellite P305D-S8828 WPS Library v.1.0.0.7 driver,Best Way to Download NVidia GeForce 6100 VGA Driver v.304.51 Certified,How Can You Update & Download NVidia GeForce 9300/nForce 730i VGA Driver v.310.19 Certified,Method to Download NVidia GeForce GT 330M Driver v.340.65,How Can I Update & Download NVidia GeForce GTX 590 Driver v.280.26 WHQL,Method to Download NVidia Tesla C2050 Driver v.319.17,BSOD after upgraded to Windows 8.1 (memory problem?),Blurry programs on Windows 8.1,C:\Window|Microsoft.Net\Framework\v4.0.30319\mscoreei.dll could not be loaded,Browsing history is no longer visible,Bulk deleting from email deleted items folder
# by ExternalCdDrive8 | 2016-08-26 15:18